Experimental Analysis and Simulation of Novel Technical Textile Reinforced Composite of Banana Fibre.

The use of natural fibres allows reducing environmental impact, due to their natural renewable origin and the lower energy needed for their production and processing. This work presents the mechanical characterization of a newly developed technical textile, with banana fibre treated by enzymes, comparing experimental results with numerical simulation based on the definition of the unit cell at micromechanical level. The experimental test shows that the composite with the fabric of banana fibre presents worse mechanical behaviour than the one with commercial flax fibre. The presence of wool, necessary for producing the yarn, reduces the mechanical properties of the banana textile. The numerical simulation had an acceptable error compared with the experimental results, with a global average error of 9%, showing that the predictive modelling based on the multiscale method is suitable for the design process of this kind of composite.

Production of Banana Fiber Yarns for Technical Textile Reinforced Composites.

Natural fibers have been used as an alternative to synthetic ones for their greener character; banana fibers have the advantage of coming from an agricultural residue. Fibers have been extracted by mechanical means from banana tree pseudostems, as a strategy to valorize banana crops residues. To increase the mechanical properties of the composite, technical textiles can be used as reinforcement, instead of short fibers. To do so, fibers must be spun and woven. The aim of this paper is to show the viability of using banana fibers to obtain a yarn suitable to be woven, after an enzymatic treatment, which is more environmentally friendly. Extracted long fibers are cut to 50 mm length and then immersed into an enzymatic bath for their refining. Conditions of enzymatic treatment have been optimized to produce a textile grade of banana fibers, which have then been characterized. The optimum treating conditions were found with the use of Biopectinase K (100% related to fiber weight) at 45 °C, pH 4.5 for 6 h, with bath renewal after three hours. The first spinning trials show that these fibers are suitable to be used for the production of yarns. The next step is the weaving process to obtain a technical fabric for composites production.